• Overview
  • Features
  • Technical Data 2-pole
  • Technical Data 4-pole
  • 360° - View

Type MPK

  • 2-pole centrifugal pump with 2900 rpm, capacity up to 55 m³/h
  • 4-pole Type MPK-4 with 1450 rpm, capacity up to 130 m³/h
  • Especially for pumping neutral, aggressive or corrosive chemicals
  • Due to the bearing arrangement of the inner rotor / impeller shaft there is no bearing in the suction area of the pump. The result is an excellent flow, low NPSH values and a very silent running
  • The special tubular impeller provides high pressures, even without the normal small gap widths, which are sensitive to crystallizations or contaminations
  • Bearings made of high quality silicon carbide
  • Only the strongest types of available permanent magnets are used to guarantee a good torque transmission in the whole operating rangeOur modular construction system ensures an optimal adjustment to the required applications
  • Operating temperatures: PP, PP natur < 75°C | PVDF < 95°C
  • 100% leakage-free –> magnetic coupling


  • Version in PP
  • Static sealing in EPDM or FPM
  • Standard union bush
  • Horizontal build as block assembly
  • Leakage-free and environmentally safe
  • Protection class IP55
  • IE3 drives from 0.75 kW
  • Suitable for frequency controller
  • Improvement of efficiency and reduction of noise emission
  • Normal suction – radial single stage version


  • Version in PP-N, PVDF or stainless steel
  • Static sealings in FEP coated
  • Flange connection
  • Inner rotor in stainless steel
  • Connector fittings
  • Protection class IP56 or higher
  • Special voltage
  • IE4-model, IE5-model
  • PTC-resistor
  • Frequency controller assembly
  • Special motor coating

[lptw_table id=”2881″ style=”default”]

[lptw_table id=”2880″ style=”default”]

[lptw_table id=”2882″ style=”default”]

[lptw_table id=”2883″ style=”default”]


Sager + Mack GmbH & Co. KG
Max-Eyth-Str. 17
74532 Ilshofen-Eckartshausen

phone +49 (0) 7904 9715-0