CARTRIDGE INSERT:

This cartridge filter insert is designed for the Sager+Mack multifuncional filter. These filter elements are depth filter elements that are usually specially wound or produced by the melt-blown method and are flowed through from the outside to the inside. Contamination of different sizes infiltrate to different depths in the filter cartridge and are retained here. The filter cartridges are attached by a central tension rod and counter-holder and fixed to the insert, thus a by-pass is excluded.

SPECIFICATION:

Material of the filter insert: PP (optional PPN or PVDF)
Filter medium: 5 Filter cartridges 20″
Type: DOE* / Ø 2.5″ (~ Ø 64 mm)
Max. operating temperature: 75 °C

* Double Open End

BENEFITS:

• When cleaning the filter, these cartridges will be changed easily and fast
• Extremly short process interruption during filter change
• Installation error absolutely minimized
• Large dirt adsorption capacity
• High flow rate
• Low pressure drop
• Cartridge change easy and without any tools
• Non-metallic solution contact – non-corrosive

CHARACTERISTIC CURVE:

DISC FILTER INSERT:

This disc filter insert is designed for the Sager+Mack multifuncional filter. The filter inserts are assembled with filter inlays (i.e. paper, nonwoven fabric or mesh). The contamination is collected on the filter inlays. which can be easily disposed and changed. Depending on the flow rate and the filter porosity, different filter inlays can be used, which can be compiled to filter packages. The filter inserts are clamped between screened and grooved plastic plates – so by-pass is excluded.

SPECIFICATION:

Material of filter insert: PP (optional PPN or PVDF)
Filter medium: max. 65 Filter disc*
Type: 210/50
Polluting load volume: 9.4 dm³**
Max. operating temperature: 75 °C

* Depending on thickness of filter inlays (max. height of deck approx. 20”)
** Reference value for H2O depending on filter porosity and application

BENEFITS:

• This is a very low-price filter media
• The filter inlays can be easily replace when cleaning the filter
• Low amounts of the filter media have to be disposed
• Disc filters are also particularly suitable for slugging with a filter aid such as diatomaceous earth or activated carbon
• High polluting load volume, large filter area
• Change easy and without any tools
• Non-metallic solution contact – non-corrosive

CHARACTERISTIC CURVE:

ADSORBTION FILTER INSERT:

This adsorbtion filter insert is designed for the Sager + Mack adsorbtion filter. The insert is filled with the adsorbtion filter material. The dirt attaches on this special material. The saturated material can simply be busted and disposed.

SPECIFICATION:

Material of filter insert: PP (optional PPN)
Filtermedia: Adsorbtion material
Type: Sorber SM / Sorbertex
Adsorbtion volumen: 16 l
Max. operating temperature: 75 °C

BENEFITS:

• Optimization of the cleaning result: removes oil and mechanic dirt
• Reduces the consumption of chemicals
• Reduces the process-costs
• Maintains rinsing bath in top condition
• Reduces amount of COD, TOC and DOC**
• Einfach und schnell austauschbar
• Non-metallic solution contact; non corrosive

** COD – chemical oxygen demand | TOC – total organic carbon | DOC – dissolved organic carbon

APPLICATION FIELD:

• Adsorption from mineral oils of aqueous cleaners like i.e.
  – surfactant solutions
  – alcaline or neutral media (emulsifying or non emulsifying)
  – electrolytic degreasing
  – ultrasonic cleaners
  – acid etch degreasers
  – phosphate baths
• Separation of oil slurry in the media surface
• Extended lifetime of aqueous cleaners