• Overview
  • Features
  • Specification
  • Technical description


  • Filters of type series 4 are designed for high pressures of max. 4.0 bar
  • Filters of type series 6 are specially designed for higher pressures of max. 6.0 bar
  • Categorization acc. to Directive 2014/68/EU
  • With these filters high flow capacities can be managed with relatively small systems
  • This results in a reduction of investment costs and installation effort
  • Due to the special laid-over (crescent shaped) pleat geometry of the PP-filter cartridge a large surface area will be reached which causes a low flow resistance and thus resulting in low initial differential pressures
  • An integrated support in the filter housing minimizes waste materials that have to be disposed
  • Due to the large diameter of the filter cartridge considerable advantages will be given by the flow from inside to outside: the contamination is collected inside the filter cartridge and the cleaning effort is reduced notably
  • The filter cartridge is sealed by an o-ring with the adapter in the filter housing, whereby a hermetic seaking is ensured – in spite of quick filter change


  • Version in PP
  • Sealings in EPDM
  • Through bolt star knob fastening
  • Air bleeding unit with connection for pressure gauge
  • Stainless steel cover reinforcing plate
  • Surrounding splash guard
  • Standard union bush


  • Version in PVDF
  • Special connections on customer’s request
  • Sealings in FPM or FEP coated
  • Swing star knob fastening
  • Hinge cover
  • Pressure gauge

[lptw_table id=”2553″ style=”default”]

* Anhaltswert für Wasser je nach Filterfeinheit und Anwendung


Polypropylene (PP) (PPN) max. 75°C
Polyvenylidenfluoride (PVDF) max. 95°C


Sager + Mack GmbH & Co. KG
Max-Eyth-Str 17
74532 Ilshofen-Eckartshausen

phone +49 (0) 7904 9715-0